9120BS Oscilloscope High Voltage Probe

Model:9120BS
Price:0US$

● High voltage test probe
● 9120BS is a high voltage probe that is used with Oscilloscope
● Attenuation Ratio: 1000:1
● Measuring range: AC 20KV/DC 30KV
 Details



Oscilloscope High Voltage Probe

Model: 9120BS

9120BS is a high voltage probe that is used with Oscilloscope
Test Lead Set with BNC safety plug system
 
Attenuation Ratio: 1000:1
 
Measuring range: AC 20KV
                        DC 30KV

Features:
● 9120BS is a High voltage test probe
● that is used with Oscilloscope
● 9120BS are high voltage probes, They measure both AC and DC voltages with your Oscilloscope.
● They consist of a test clip ground and a BNC test leads for Oscilloscope.
● The enclosure has very good insulation properties.
● They are lightweight and rugged.
● Two kinds of contact tips are available. One is a round needle tip for normal use. Another is a special flat spring type for CRT anode.
● Before taking any measurements, first connect the alligator clip of this probe to earth ground and make sure connection is proper.
● Meet IEC/EN 61010-1, IEC/EN 61010-2-031

Technical Data:
Input Impedance
500 MΩ
Attenuation Ratio
1000 1
Accuracy
DCV ( 0 ~ 20kV )    ± 1%
DCV ( 20kV ~ 30kV )    ± 2%
ACV ( 0 ~ 20kV )    ± 5%
Max. Working voltage
AC 20kV
DC 30kV
Operating temperature
0°C ~ 50°C
Storage temperature
-10°C ~ 60°C
Relative Humidity
80% Max
Cable Length
1 m
Installation
Category lll.
Pollution Degree
2.
Altitude
up to 2000m
Weight
Approx. 260g
 
Note:        9128B is designed to be used with DMM
                9120BS is designed to be used with Oscilloscope
 

Scope of Supply:
1pc Multimeter High Voltage Probe 9120BS
2 pc Metal hook
1pc Instruction manual








 

 
 

  |About us | Contact | Copyright © 2011 Shanghai Beha Electronics Co.,Ltd |