Download Data Sheet

Battery Tester

Model: 96470

Introduction:
● The 96470 battery resistance tester can measure the resistance of rechargeable batteries and DC voltage.
● The frequency of the output signal for resistance measurement is approximately 1kHZ.
● The 4-wire measurement method can reduce contact resistance and test lead resistance.
● The 96470 can also test Ni-cd, Ni-MH, Li-ion batteries.
● When contacting the probes with the battery terminals, press the probes until the inner pin conductors are fully recessed, and both source and sense conductors make good contact.

Features:
● 2000-count LCD
● DC Voltage measurement.
● 4-wire resistance measurement.
● Data Hold function.
● Low Battery indication.
● 9V/DC power supply.
● Measure battery types : Ni-cd, Ni-MH, Li-ion.
● Simple operation.
● Lead resistance and contact resistance eliminated. 

Display	3 1/2 Digital, LCD, 1999 Digits
DC Voltage
Measuring Ranges	2V/20V/200V
Resistance	1 mV/10 mV/100 mV
Accuracy	± (1 % rdg. + 1 Digit)
Resistance (4-wire)
Measuring Ranges	200mΩ/2000mΩ/20Ω
Resolution	0.1mΩ/1mΩ/10mΩ
Accuracy	± (3 % rdg. + 3 Digit)
Power Supply	1 x 9 V, IEC 6LR 61
Safety in compl. with	EN 61010-1/EN 61326-1
Measurement Category	CATⅠ600V
Dimensions	192 x 88.6 x 45.2 mm
Weight	Approx. 360g (battery included)