- Home > Products > Cable Testers/Cable Tracer/Wire Tracers > Lan Cable Tester
- Lan Cable Tester
9185B Lan Cable Tester
Model:9185B
9185B Lan Cable Tester/ Network cable Tester
• Designed for RJ45/RJ11 modular cables, 10/100 base-T cable and Token Ring cable etc.
• The Lan cable tester can verify cable continuity, open,short circuit and miss-wired.
Details
Lan Cable Tester/ Network cable Tester
Model: 9185B
Introduction
• The 9185B Lan cable tester is a newly designed tool,that can easily test the correct pin configuration of the RJ45/RJ11 modular cables, 10/100 base-T cable and Token Ring cable etc.
• By comparing one transmitting end and the corresponding receiving end, the 9185B Lan cable tester also can test installed cable far away by using the remote receiving unit.
• The 9185B provides the variety for wiring check, such as cable continuity, open status, short status and miss wired.
Features
• Designed for RJ45/RJ11 modular cables, 10/100 base-T cable and Token Ring cable etc.
• The Lan cable tester can verify cable continuity, open,short circuit and miss-wired.
• The remote receiving unit is available for installed cables far away either on the wall plates or on the patch panels.
• Auto and manual scan function.
• Ground wire test.
• Lock status function.
• Buzzer sound warning for wire status.
• Display: LED indication for wire status.
• Meets EN61326-1
Operation
Loopback test
• Plug one end of the testing cable into the Rj45 jack of sourcing end on the master unit and another end of the testing cable into the RJ-45 jack of receiving end on the master unit.
• Press the "
" button, the master unit will start a sequential scanning process if the master unit is in "auto-scanning" mode.
" button, the master unit will start a sequential scanning process if the master unit is in "auto-scanning" mode.• Press the "" button, the pin1 LED lamps of the LED indicators will be alight if the master unit is in "manual scanning" mode.
" button, the pin1 LED lamps of the LED indicators will be alight if the master unit is in "manual scanning" mode.• Note: When the battery power is low, the testing results may not be correct. Please replace with a new battery.
• You can choose a auto-scanning mode or a manual scanning mode by pressing the "AUTO" button or the "MANU" button.
• The Lock function is available in "auto-scanning" mode.
• When the loop is "OPEN", you will hear the sound of the buzzer.
Remote test
• Plug one end of the testing cable into the Rj45 jack of sourcing end on the master unit and another end of the testing cable into the RJ-45 jack of the remote receiving unit, then make tests.
• Read the testing results from the LED indicator on the remote receiving unit.
Specifications:
|
Display
|
ELD
|
|
Operating Temperature
|
0~40℃
|
|
Power Source
|
9V x 1 Battery
|
|
Dimensions
|
Master: 132(L) x 55(W) x 39(H)mm
Remote receiving unit: 74(L) x 30(W) x 25(H)mm
|
|
Weight
|
Master: 148g
Remote receiving unit: 33g
|
Scope of Supply:
1 pc 9185B
1 pc Carrying pouch,
1 pc batteries 9V
1 pc batteries 9V
1 pc Self-test Network cable
2 pc BNC Adapter cable
1 pc Instruction Manual
Test result
